The inventor’s kit for the micro:bit BBC bit is a great way to get started with programming and hardware interaction with the BBC’s micro bit. This inventor’s kit contains everything you need to practice 10 experiments, including LEDs, motors, LDRs and capacitors.

To get started, we have an easy-to-follow tutorial that will walk you through everything you need to know about BBC micro-bit programming. You do not need experience with programming as the exercise book will guide you through each step. You will program and create circuits in no time!

The inventor’s kit for the BBC micro: bit provides a fantastic way to learn how to build and control electronic circuits. The micro: BBC bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for more details). Using our specially developed Edge BBC connection card in conjunction with the test card (see below) makes it easy to use these pins to connect additional components to the BBC micro bit.

No welding is required and you can build your first circuit in minutes!

Note:

This kit requires assembly.

Characteristics:

No soldering required – build your first tour in minutes!

Do 10 experiments included in the step-by-step tutorial book provided.

All parts are included to conduct the 10 experiments (listed below).

21-pin cutout accessible from the microphone: BBC bit using Edge Connector card for microphone: BBC bit (included).

Small prototype breadboard included for rapid prototyping.

Contains:

• 1 x mounting plate.
• 1 x Potentiometer and finger Setting the spindle.
• 2 x plastic spacer 10mm.
• 1 x sticky fixer for battery.
• 1 x small prototype drawing board.
• 1 x terminal connector.
• 4 x push switch.
• 1 x motor.
• 1 x transistor.
• 2 x red LED 5mm.
• 2 x orange LED 5mm.
• 2 x yellow LED 5mm.
• 2 x green LED of 5mm.
• 1 x RGB LED 5mm.
• 1 x fan blade.
• Resistance of 5 x 2.2KΩ.
• Resistance of 5 x 10KΩ.
• Resistance 5 x 47Ω.
• 1 x Edge Connector Bypass Board for BBC Micro: bit.
• 1 x miniature LDR.
• 10 x jumper wires male to male.
• 10 x jumper wires male to female.
• Electrolytic capacitor 1 x 470uF.
• 1 x Piezo Buzzer Element.
• 4 x M3 pan head screws.

The inventor’s kit for the micro: BBC bit is a great way to get started with programming and hardware interaction with the BBC’s micro bit. This inventor’s kit contains everything you need to practice 10 experiments, including using LEDs, motors, LDRs and capacitors.

To get started, we have an easy-to-follow tutorial that will walk you through everything you need to know about BBC micro-bit programming. You do not need experience with programming as the exercise book will guide you through each step. You will program and create circuits in no time!

Note: Micro card: bit NOT INCLUDED